utility billing
5 min read

Average Cost of Utility Bills: What You Need to Know

Average US utility bills by service, with sources: electricity, natural gas, water and sewer, what drives bill differences, and how utilities benchmark them.

See a 10-minute demo

For US Utilities serving 3,000-100,000 meters and for operations team, billing team and utility managers. For Heads of Billing who own collections accuracy and revenue leakage.

Written by
Sewanti Lahiri
Published on
November 21, 2026
Updated on
November 22, 2026

The average US home paid $142.26 a month for electricity in 2024, about $72 a month for natural gas based on EIA's 2024 residential gas data, and $86.41 a month for water and sewer in 2025 at 4,800 gallons. Across all US households, spending on electricity, natural gas and water and other public services averaged about $278 a month in 2025, according to the BLS Consumer Expenditure Survey. Customers judge their own bill against figures like these, so utility billing software that applies every rate correctly matters as much as the rate itself.

Average Monthly Utility Bills in the US

National averages come from different agencies and describe different years, so each figure below states its year and basis.

ServiceAverage monthly billYear describedBasis and source
Electricity$142.262024Average across 143 million residential customers using 863 kWh a month (EIA Table 5A)
Natural gasAbout $722024Calculated from residential deliveries, customers and price in the EIA Natural Gas Annual
Water and sewer$86.412025Average charge for 4,800 gallons across 414 utilities (Teodoro affordability update)
Electricity, gas, water and other public servicesAbout $2782025BLS average of $3,331 a year across all households (BLS)

EIA does not publish an average gas bill, so the gas figure is a calculation. In 2024, utilities delivered 4,389,004 million cubic feet of gas to 73,719,064 residential customers, about 59.5 thousand cubic feet each. At the average residential price of $14.50 per thousand cubic feet, that comes to about $863 a year, or $72 a month.

The combined figure adds three BLS line items for 2025: $1,886 for electricity, $562 for natural gas and $883 for water and other public services, which includes sewer and trash. BLS averages cover every household, including homes with no gas service and renters whose water is in the rent. That is why the BLS gas figure is lower than the per-customer EIA calculation. The combined figure leaves out phone, internet, propane and fuel oil.

What Drives the Difference Between Utility Bills

Two homes on the same street can have very different bills. Six factors explain most of the gap:

DriverHow it changes the billExample from the data
RatesA higher price per unit raises the bill even at low useHawaii averaged 42.86 cents per kWh and a $212.12 bill on only 495 kWh in 2024 (EIA)
UsageMore units at a low price can still produce an average billLouisiana used 1,202 kWh a month at 11.73 cents for a $140.96 bill in 2024 (EIA)
Climate and seasonHeating and cooling move bills by month and by regionEIA expects gas-heated homes to spend 9% less and electric-heated homes 4% more in winter 2026-27 (EIA)
Fixed chargesA larger share of the bill is owed before any water or power is usedThe charge for the first gallon of water and sewer grew about 4.4% a year from 2017 to 2025, against 3.3% for a 4,800-gallon bill (Teodoro)
Infrastructure and operating costsTreatment, energy, chemicals and capital projects are recovered through ratesWater and sewer bills in 50 large cities rose 5.1% in 2025 and 24.2% over five years (Bluefield Research)
Service mixWhich services a home buys, and which are in the rent, changes what one household paysBLS averages include households with no separate gas or water bill (BLS)

EIA explains the state gaps the same way. Hawaii's prices are high because it relies on petroleum-fired generation. Southeastern homes use more power for summer air conditioning and electric heating in winter.

Rate design adds another layer. Tiered, seasonal and time-of-use rates mean two customers with the same monthly total can pay different amounts. The guide to usage-based billing for utilities explains how those structures work and what the billing system has to support.

Fixed Charges and Other Parts of a Utility Bill

A national average hides the parts of the bill. Most residential bills combine some of these charges:

  • Customer or base charge. A fixed monthly amount per account or meter, owed even with zero use.
  • Volume or energy charge. A price per kWh, therm or thousand gallons, applied to metered use.
  • Tiers, seasons and time of use. Prices that change with the amount used, the month or the hour.
  • Riders and adjustments. Separate lines that pass through fuel, purchased power or purchased water costs.
  • Taxes and franchise fees. Local and state charges that vary by jurisdiction.
  • Other services. Sewer, stormwater and trash charges billed on the same statement as water.

Fixed charges matter most for low-use customers. When the base charge rises, a household that conserves sees its bill move closer to the average, because a larger share of the bill no longer depends on use.

Average Electric Bills by Region

Electricity is the one service with federal bill data by state and region. The table below shows EIA's 2024 averages for each census division.

Census divisionAverage monthly use (kWh)Average price (cents per kWh)Average monthly bill
New England60127.68$166.48
Middle Atlantic67320.63$138.85
East North Central73816.48$121.66
West North Central88213.47$118.81
South Atlantic1,04814.51$152.04
East South Central1,12613.40$150.89
West South Central1,10314.04$154.89
Mountain86514.12$122.20
Pacific Contiguous61824.23$149.69
Pacific Noncontiguous52834.95$184.65
United States86316.48$142.26

Source: EIA, 2024 Average Monthly Bill, Residential.

New England uses the least electricity of any mainland division and still pays one of the highest bills, because its price is the highest. The three southern divisions use far more power at lower prices and end up with bills of $150 to $155.

Water and sewer bills vary by region too. In Bluefield Research's 2025 index of 50 cities, combined water and sewer bills were highest in the Northeast at $147 a month and the West at $143.

How Utilities Use Average Bill Benchmarks

What does a rate change mean for the bill of a typical customer in your service area?

Average and typical bills are working numbers for a utility, not only figures for customers. Utilities use them to:

  • Show rate study impacts. Compare the typical residential bill under current and proposed rates at the same usage.
  • Test affordability. EPA generally uses 2.5% of median household income for water, or 4.5% for water and wastewater combined, as an affordability threshold.
  • Size assistance programs. Estimate how many customers pay a bill above a set share of income, and what a discount or lifeline rate would cost.
  • Set budget billing amounts. Spread a customer's average annual bill into equal monthly payments.
  • Explain increases to the board and the public. Present the change in dollars per month for a typical home, not only as a percentage.
  • Compare with nearby utilities. Check the typical bill against neighboring systems at the same usage level.

Affordability pressure is real. Bluefield Research found that a monthly water and sewer bill in 2025 took an average of 11.5 hours of minimum-wage work to cover. Payment options often carry these programs to the customer, and the guide to utility bill payment software covers budget billing, payment plans and autopay.

How a Utility Can Benchmark Its Average Residential Bill

Do you know what your typical residential customer actually pays each month?

  1. Define the customer group. Select residential accounts in one rate class and one meter size that were billed for all 12 months, and leave out vacant, sewer-only and partial-year accounts.
  2. Pull 12 months of billed usage and charges. Use final billed amounts after corrections, so the average includes every season and every adjustment.
  3. Calculate the average and the median. Report both for usage and for the bill, because a small number of very large users raises the average above what most customers pay.
  4. Build a typical bill at median usage. Apply current rates to the median monthly usage and split the result into fixed charges, volume charges, riders and taxes.
  5. Compare with outside benchmarks at the same usage. Check the typical bill against EIA state averages for electricity, published water and sewer surveys, and neighboring utilities.
  6. Test affordability and proposed rates, then repeat each year. Divide the annual typical bill by local median household income, run proposed rates through the same model, and refresh the benchmark after each rate change.

Step 3 changes the most conversations. A board that sees only the average can overestimate what a typical household pays, especially in systems with large irrigation users. For the wider set of billing metrics worth tracking alongside the average bill, see the guide to CIS utility billing KPIs.

How to Show Customers Their Usage Against the Average

Can a customer tell from the bill alone why this month is higher than last month?

Most customers compare their bill with last month, with a neighbor or with a national figure they read online. The bill and the customer portal can give them better comparisons:

Bill or portal elementWhat the customer seesWhy it helps
13-month usage historyThis month against the same month last yearSeparates seasonal change from a real increase
Days in the billing periodNumber of days billed and average daily useExplains a higher bill from a longer cycle
Comparison with the class averageThe customer's use against the utility's average residential useGives a local benchmark instead of a national one
Read typeWhether the read was actual or estimatedWarns the customer that a correction may follow
Fixed and volume splitWhich charges depend on use and which do notShows how much of the bill the customer can change
Rate change noticeThe date new rates took effectExplains an increase with no change in use

Local comparisons are more useful than national ones. A home in New England and a home in the South can pay the same electric bill for very different reasons, as the regional table shows. The class average from the utility's own bill history is the figure that fits the customer's rates and climate.

Why Accurate Billing Matters When Customers Compare Bills

When a customer compares a bill with a published average, will every number on it hold up?

A bill far above the average sends the customer to the call center. If the cause is a billing error, the utility loses trust and staff time on a problem it created. The most common causes of an off-average bill on the utility's side are:

  • Estimated reads followed by a catch-up bill. Several months of low estimates, then one actual read that bills all the missed use at once.
  • Wrong rate class or meter multiplier. A setup error that bills the account at the wrong price or the wrong volume.
  • A longer billing period. A cycle of 35 or more days that bills more use than a normal month.
  • Proration errors at move-in or move-out. Fixed charges billed twice, or usage split between occupants on the wrong date.
  • Rate changes applied to the wrong dates. New rates charged on usage from before the effective date.

Checks before the bill run catch most of these. Validate reads, flag bills that move by more than a set percentage from the account's own history, and review long cycles before bills go out. When a high bill does reach a customer, the guide to handling high bill complaints covers how to investigate it and respond.

How SMART360 Supports Accurate Bills and Benchmarking

SMART360 is a cloud-native platform for utilities with 3,000 to 100,000 accounts. Rates, fixed charges and customer classes are set in the admin screen, so a rate study change does not need a custom change request. Read validation flags missing, estimated and unusual reads before the bill run, and customers see their usage and bills in the consumer portal.

Billing, customer and meter data sit on one platform, so the 12 months of billed usage and charges needed for a benchmark come from one system instead of several exports. Island Water Authority reached 99% billing accuracy and 38% faster meter-to-bill on SMART360. Customer retention across the platform is 95%, and a typical go-live takes 20 to 24 weeks.

Conclusion

The average cost of utility bills in the US is a set of separate figures: about $142 a month for electricity in 2024, about $72 for natural gas, and about $86 for water and sewer in 2025. Rates, usage, climate, fixed charges and infrastructure costs explain why any one household's bill differs from those numbers. For a utility, the useful benchmark is its own typical residential bill, calculated from a full year of accurate bills and shown to customers next to their own usage.

See SMART360 in Action

SMART360 applies your rates, fixed charges and riders on every bill and validates reads before the bill run. See SMART360 utility billing software run a residential bill from read to customer portal.

Frequently Asked Questions

What is the average cost of utility bills per month?

In 2025, US households spent about $278 a month on electricity, natural gas and water and other public services combined, according to the BLS Consumer Expenditure Survey. By service, the average electric bill was $142.26 in 2024 (EIA), natural gas averaged about $72 a month in 2024 based on EIA data, and water and sewer averaged $86.41 in 2025 at 4,800 gallons.

What is the average electric bill in the US?

The average US residential electric bill was $142.26 a month in 2024, according to the EIA. The average customer used 863 kWh a month at 16.48 cents per kWh. Bills ranged from $92.88 in New Mexico to $212.12 in Hawaii.

How much is the average water and sewer bill?

The average US utility charged $86.41 for a month of water and sewer service at 4,800 gallons in 2025, based on a survey of 414 utilities. Bills are higher in some regions: Bluefield Research found combined monthly bills averaged $147 in the Northeast and $143 in the West in 2025.

Why is my utility bill higher than average?

The most common reasons are higher local rates, more usage from heating or cooling, a larger fixed charge, a longer billing period, or a catch-up bill after estimated reads. Comparing your bill with the same month last year, and with your utility's own average, is more useful than comparing it with a national figure.

How do utilities calculate an average residential bill?

Utilities take 12 months of final billed usage and charges for one residential rate class, then calculate both the average and the median. Most build a typical bill by applying current rates to median usage, because a few very large users raise the average above what most customers pay.

About Two Cta Image

Ready to see how SMART360 fits your utility?

Book a personalized demo with the SMART360 team and see how SMART360 fits your utility?

Related Post From This Category