wastewater billing
7 min read

Wastewater Billing: How Utilities Calculate Sewer Charges

How utilities calculate sewer charges: base and volume charges, winter averaging, caps, ERUs, exempt meters, and how to set it all up in your billing system.

See a 10-minute demo

For US Utilities serving 3,000-100,000 meters and for operations team, billing team and utility managers. For Heads of Billing who own collections accuracy and revenue leakage.

Written by
Sewanti Lahiri
Published on
November 11, 2026
Updated on
November 15, 2026

Wastewater billing is how a utility charges customers for sewer service. Because few homes have a sewer meter, most utilities bill sewer from water use: a fixed base charge plus a volume charge based on metered water, a winter average or a capped volume. A water utility management platform applies that method on every bill, alongside the water, stormwater and trash charges on the same account.

What Goes Into a Sewer Bill

Sewer charges now make up a large share of what households pay for water service. The typical monthly sewer bill grew from less than $25 in 2001 to nearly $65 in 2020, for a household using 7,500 gallons, according to Black & Veatch's 2021 water and wastewater rate report. With bills that size, customers question every sewer charge they think is wrong.

Wastewater flow is rarely metered at a home, so the bill estimates it. Most sewer bills combine some of these parts:

  • Base charge. A fixed monthly amount per account or per equivalent residential unit (ERU), billed regardless of water use.
  • Volume charge. A rate per 1,000 gallons or per hundred cubic feet, applied to water use or to a winter average.
  • Volume cap. A maximum billable volume, so summer watering does not inflate the sewer charge.
  • Class or strength differences. Different rates for customer classes whose wastewater costs more to treat.
  • Capital or debt charge. A separate line that funds treatment plant and collection system projects.

The Main Ways Utilities Calculate Sewer Charges

Does your sewer rate charge customers for water that never reaches the sewer?

According to an MRSC analysis of sewer rate structures, most sewer rates include a base rate that applies regardless of water use. The volume part is where utilities differ.

MethodHow it worksBest forTrade-off
Flat rateSame sewer charge for every home in a classSystems without water metersNo link between use and bill
Winter average (tailored fixed rate)Each home's charge set from its winter water use, fixed for the yearResidential customers with summer irrigationNeeds a full winter of history per account
Volumetric with a capCharged on actual water use, up to a monthly maximumUtilities that want bills to follow useCap must be set and reviewed
Return-flow factorCharged on a set percentage of water useSimple volumetric billingOne percentage fits some customers poorly
ERU-basedCharge per equivalent residential unitCommercial and multifamily accountsERU assignments must be kept current

The choice is a policy decision as much as a billing one. Volume-based rates follow use and support conservation, while fixed rates give the utility steadier revenue. Most utilities settle the method in a rate study and adopt it by ordinance or board resolution.

How Winter Averaging Works

Winter averaging is the most common way to keep irrigation out of residential sewer charges. In winter, almost all water a home uses goes down the drain, so winter water use is a fair estimate of sewer flow for the rest of the year.

The rules vary by utility. The City of Murphy, Texas, for example, averages the three lowest water-use months from November through February, and bills customers without enough history at the citywide average. The worked example below uses that method.

MonthWater used (gallons)Counted in the average?
November5,200Yes
December4,600Yes
January6,900No, highest month
February4,800Yes
Winter average4,867Billed each month until the next recalculation

Utilities also decide what happens when a customer's actual use falls below the average. Some bill the lower of the two, which customers see as fairer. Whatever the rule, write it down so the billing system and the customer service team apply it the same way.

Irrigation meters raise a related question: water through a dedicated irrigation meter never reaches the sewer. The guide to parks irrigation water billing covers how to set those meters up as sewer-exempt.

How to Set Up Wastewater Billing in Your Billing System

When the rate study changes your sewer method, can your billing system apply it without a custom change request?

  1. Confirm the method in your rate ordinance. Write down the base charge, the volume basis, any cap, the averaging months and the rule for new customers.
  2. Map every account to a sewer status. Mark each service point as sewered, sewer-only, exempt or on a septic system, and attach sewer to the right premise.
  3. Set up the rate and the averaging rule. Configure the base charge, volume rate and cap, and the months and rules used to calculate each winter average.
  4. Assign defaults for new and changed accounts. Apply the system average to customers without history, and decide when a move-in starts a new average.
  5. Run a parallel test. Calculate one full cycle of sewer charges in the new setup and compare them with the current bills, account by account.
  6. Recalculate on schedule and tell customers. Run the annual average on the set date, check exceptions, and send customers their new sewer basis before the first bill.

Step 5 catches most setup errors before a customer sees them. Pay attention to accounts whose sewer charge moves by more than a set percentage.

Commercial, Multifamily and Special Cases

Residential rules rarely fit every account. The MRSC analysis notes that commercial ERUs are most commonly based on water meter size and fixture counts, and that multifamily units are often assigned 0.6 to 0.8 ERUs per dwelling unit.

CaseCommon approach
Commercial and industrial accountsVolumetric charge, often with ERUs based on meter size and fixture counts
Multifamily buildingsERU per dwelling unit, below one ERU per unit
Irrigation-only metersExempt from sewer charges
Deduct meters (cooling towers, process water)Water through the deduct meter subtracted from the sewer volume
Sewer-only customers on private wellsFlat or ERU-based charge, since there is no water read
High-strength wastewater customersClass-based rate that reflects the cost of treating stronger wastewater

Each case needs its own rule in the billing system. A deduct meter that is not linked to the right account bills the customer for sewer on water that never entered the sewer.

Billing Sewer With Water, Stormwater and Trash on One Bill

Most utilities that bill sewer also bill water, and many add stormwater and trash to the same statement. One bill is easier for customers, but each service usually belongs to its own enterprise fund. The billing system has to keep them apart where it matters:

  • Separate revenue by fund. Post water, sewer, stormwater and trash revenue to their own GL accounts.
  • Apply partial payments by rule. Decide which service a partial payment pays first, and apply it the same way every time.
  • Show each service on the bill. List the base and volume charges for each service on its own line.
  • Track arrears by service. Report unpaid balances by fund for budget and audit work.
  • Handle different billing cycles. Some utilities bill stormwater quarterly while water and sewer bill monthly.

Stormwater has its own charge methods, often based on impervious surface. The guide to billing stormwater quarterly covers how to run it alongside monthly water and sewer bills.

Common Sewer Billing Errors to Catch

Sewer charges depend on data that changes: occupants, meters, exemptions and averages. The errors below cost revenue or create complaints:

  • Missing sewer on a sewered premise. A new connection set up with water only, so sewer is never billed.
  • Sewer billed on an exempt meter. An irrigation or deduct meter charged for sewer it should not carry.
  • Stale winter averages. An average that was not recalculated, or carried over to a new occupant.
  • Wrong ERU count. A building that added units without its ERU assignment changing.
  • Sewer on an estimated read. A volume charge calculated on an estimate during the averaging months, which then sets the whole year.

A quarterly report of sewered premises with no sewer charge, and exempt meters with one, finds most of these. The guide to reducing billing errors and revenue leakage covers the wider set of checks for water utilities.

What to Look for in Billing Software for Sewer Charges

Can your billing system show a customer exactly how their sewer charge was calculated?

CapabilityWhy it matters
Configurable sewer rates in the admin screenRate study changes do not need a paid change request
Averaging rules with chosen months and exclusionsApplies your ordinance exactly, every year
Volume caps and return-flow factorsSupports volumetric methods without manual work
Sewer status per service pointPrevents missed or wrongly billed sewer charges
Deduct and irrigation meter linksSubtracts water that never enters the sewer
Multi-service bills with fund-level GL mappingKeeps water, sewer, stormwater and trash revenue separate
Exception reports before the bill runFlags large sewer changes and missing charges

Ask each vendor to set up your exact sewer method in a demo and calculate a few of your real accounts. For the broader evaluation, the guide to water utility billing software covers what else to compare.

How SMART360 Bills Wastewater

SMART360 is a cloud-native platform for US water, electric and gas utilities with 3,000 to 100,000 connections. It bills water, sewer, stormwater, trash and other services from one account:

  • Sewer rates, base charges and customer classes are configured in the admin screen
  • Each service point carries its own services, so sewered and exempt meters are set up separately
  • Water, sewer, stormwater and trash appear on one bill with their own lines
  • Revenue for each service maps to its own GL accounts for fund accounting
  • Read validation flags missing, estimated and unusual reads before the bill run
  • Customers see usage and bills in the consumer portal

Utilities replacing an older system can configure their own sewer method in a sandbox and run it against real accounts before go-live. Island Water Authority reached 99% billing accuracy and 38% faster meter-to-bill on SMART360, and customer retention across the platform is 95%.

Conclusion

Wastewater billing is an estimate by design, because few customers have a sewer meter. That makes the method, and how consistently it is applied, the whole job. Set the method in your rate ordinance, map every account's sewer status, and test the result against real bills before customers see it. A billing system that applies the rule the same way on every account turns sewer billing from a source of complaints into routine work.

See SMART360 in Action

SMART360 puts water, sewer, stormwater and trash on one account and one bill, with rates set in the admin screen. See SMART360 utility billing software run a multi-service bill from read to GL posting.

Frequently Asked Questions

What is wastewater billing?

Wastewater billing is how a utility charges customers for sewer service. Most utilities do not meter sewer flow, so they bill a fixed base charge plus a volume charge based on water use, a winter average or a capped volume.

How is a sewer bill calculated?

Most sewer bills combine a base charge per account or per equivalent residential unit with a volume charge. The volume comes from metered water use, a winter average or a capped amount, depending on the utility's rate ordinance.

What is winter averaging for sewer?

Winter averaging sets a home's sewer volume from its water use in winter months, when little water goes to irrigation. The utility recalculates the average each year and bills it until the next recalculation. New customers usually pay a system average until they build history.

Why is my sewer charge based on my water use?

Few homes have a meter on the sewer line, so water use is the closest available measure of wastewater flow. Caps, winter averages and exempt irrigation meters keep water that never enters the sewer out of the charge.

Are irrigation meters charged for sewer?

Usually not. Water through a dedicated irrigation meter does not return to the sewer, so most utilities set those meters as sewer-exempt. Deduct meters work the same way for water used in cooling towers or industrial processes.

About Two Cta Image

Ready to see how SMART360 fits your utility?

Book a personalized demo with the SMART360 team and see how SMART360 fits your utility?

Related Post From This Category