wastewater management solutions
6 min read

5 Wastewater Management Solutions for Sustainable Cities

Five wastewater management solutions for city sewer utilities: asset risk scoring, CMOM work orders, smart sewer monitoring, DMR data and sewer billing.

See a 10-minute demo

For US Utilities serving 3,000-100,000 meters and for operations team, billing team and utility managers. For Heads of Billing who own collections accuracy and revenue leakage.

Written by
Neal Gudhe
Published on
November 20, 2026
Updated on
November 22, 2026

Wastewater management solutions are the programs and software a city or district sewer utility uses to run its collection system, stay within its permit and fund the work. The five with the widest effect are asset management with risk scoring, preventive maintenance and work orders for CMOM, smart sewer monitoring, wastewater data management for DMR compliance, and accurate sewer billing. A water utility management platform keeps the records behind all five in one place.

Why Wastewater Utilities Are Changing How They Operate

US wastewater infrastructure earned a D+ in the ASCE 2025 Report Card for America's Infrastructure, the same grade as in 2021. ASCE puts 2024 wastewater and stormwater capital needs at $99 billion a year, against a funding gap of $69 billion. EPA's 2022 Clean Watersheds Needs Survey reports $630.1 billion in clean water needs over 20 years (January 2022 dollars), with $345.7 billion of that for wastewater. The same survey counts 17,544 publicly owned treatment works serving 270.4 million Americans as of January 2022.

Money alone will not close that gap, so utilities are spending what they have with more care. That means knowing which assets are most likely to fail, keeping maintenance on schedule, finding where storm and groundwater enter the pipes, reporting accurately to regulators, and billing every account correctly.

Some measures are improving. The ASCE report notes that sanitary sewer overflows fell from 0.7 per 100 miles of pipe in 2015 to 0.16 in 2021, and that 65% of more than 450 utilities surveyed in 2023 said they were using digital tools. The five solutions below are the operational side of a sustainability program. For the wider program, including water supply and conservation goals, see the guide to sustainable water management for utilities.

The 5 Solutions in One Table

Which of these five problems costs your utility the most today?

SolutionWhat it doesMain recordsSustainability link
1. Asset management with condition and risk scoringRanks pipes, manholes and lift stations by condition and consequence of failureAsset inventory, inspections, failure historyRepair money goes to the assets most likely to fail and cause an overflow
2. Preventive maintenance and work orders (CMOM)Schedules cleaning, inspection and pump maintenance, and tracks every jobWork orders, maintenance history, backlogFewer blockages, emergency repairs and overflows
3. Smart sewer monitoringFlow, level and rainfall data show where inflow, infiltration and surcharging happenSensor readings, rain data, alarmsLess clean water pumped and treated, earlier warning of overflows
4. Data management and DMR complianceKeeps permit data, lab results and overflow records ready for electronic reportingDMRs, lab results, SSO and bypass recordsAccurate public reporting on discharges
5. Accurate sewer billingCharges every account correctly so rates fund operations and capitalAccounts, water reads, rate plansFunds the repairs the other four solutions identify

Most utilities already do some of each. The gains come from running them on shared, current records instead of separate spreadsheets.

1. Collection System and Lift Station Asset Management

Do you know which pipes and pumps carry the most risk in your system?

Asset management starts with an inventory: every gravity main, force main, manhole and lift station, with its size, material, age and location. EPA's Asset Management Best Practices Guide (2008) defines critical assets as those with a high risk of failing and major consequences if they do fail. The guide asks utilities to weigh the likelihood and the consequences of each failure, and to rank assets on that basis.

A simple way to apply this is a risk score: a condition score multiplied by a consequence score. The example below uses made-up assets to show how the ranking works.

Asset (example)Condition (1 good, 5 failing)Consequence of failure (1 to 5)Risk scoreNext action
8-inch clay main on a residential street428Add to the cleaning and CCTV schedule
24-inch trunk sewer beside a creek3515Inspect this year and plan rehabilitation
Lift station pump 2 of 2, serving 600 homes4416Rebuild or replace before the wet season
PVC main in a newer subdivision111Keep on the routine inspection cycle

The trunk sewer is in better condition than the clay main, but it ranks higher because a failure beside a creek has larger consequences. Condition scores come from CCTV inspections, manhole inspections and pump run-time records, so the ranking is only as current as the inspection data behind it.

2. Preventive Maintenance and Work Orders for CMOM

How many of last year's sewer work orders were emergencies?

CMOM stands for capacity, management, operation and maintenance. EPA's Guide for Evaluating CMOM Programs at Sanitary Sewer Collection Systems (January 2005) describes it as a set of practices for managing a collection system over its life, including knowing the condition of the system and scheduling work based on condition and performance. Inspectors reviewing a CMOM program ask to see the work order management system, how work orders are generated and closed, and the size of the maintenance backlog.

The guide sorts maintenance into four types and says the goal is to reduce corrective and emergency work through planned and predictive work.

Maintenance typeWhat it is (EPA CMOM guide)Collection system example
PredictiveLooks for early warning signs of equipment failureVibration and heat checks on lift station pumps
PreventiveScheduled work performed on a regular basisQuarterly cleaning of mains with known grease buildup
CorrectiveScheduled repairs to problems found during planned workReplacing a cracked manhole frame found during inspection
EmergencyImmediate repairs after a serious failureClearing a blockage that is causing an overflow

The same guide says emergency repairs at 5 to 10 percent of the maintenance budget would not be considered excessive. A work order system that tags every job by type lets a utility measure that share each year. It also builds the maintenance history that the risk scores in solution 1 depend on.

Lift stations deserve their own maintenance plan. Pumps run on electricity, and EPA's energy efficiency guidance for water utilities currently estimates that drinking water and wastewater plants often account for 30 to 40 percent of the energy used by municipal governments. That makes lift station pumps worth including in an energy review as well as in the maintenance plan.

3. Smart Sewer Monitoring for Inflow, Infiltration and Overflows

Where does your sewer flow rise sharply after a storm?

Infiltration is groundwater entering through cracked pipes, joints and manholes. Inflow is stormwater entering from above ground through roof drains, cellar drains and loose manhole covers. EPA lists sewer defects that allow stormwater and groundwater to overload the system among the causes of sanitary sewer overflows, along with blockages, line breaks and power failures. Every gallon of inflow and infiltration is also a gallon the utility pumps and treats without billing anyone for it.

Smart wastewater monitoring measures the problem. EPA groups smart sewer technologies into three categories.

Category (EPA)ExamplesWhat the utility learns
Asset management toolsComputerized maintenance management and enterprise asset management systemsWhat needs maintenance, when, and at what cost
System monitoring and operations toolsReal-time flow, level and rainfall sensors, decision support systems that work with SCADA, real-time controlsWhere flow rises in wet weather and where pipes surcharge
System condition and capacity toolsCCTV and newer scanning methods, condition analytics, capacity modelsWhich pipes have defects and where capacity runs short

Flow meters placed at the outlet of each sewer basin show which basins carry the most wet-weather flow. Crews then focus smoke testing, CCTV and manhole repairs on those basins instead of the whole system. Level sensors in manholes near known trouble spots can alarm before a backup reaches a home or a creek.

Sensor data is most useful when it is stored next to the asset and work order records. A utility that wants to model how its whole network responds to rain can go further; the guide to digital twin software for water utilities explains what that requires.

4. Wastewater Data Management and DMR Compliance

Treatment plants with an NPDES permit report their discharge results on discharge monitoring reports (DMRs). EPA's NPDES Electronic Reporting Rule, published October 22, 2015, required permittees to submit DMRs electronically from December 21, 2016. Phase 2 of the rule, which includes sewer overflow and bypass event reports, set December 21, 2025 as the start date for electronic submission, unless the permitting authority directs otherwise or has granted a waiver.

Electronic reporting means the data has to be complete and easy to find when the report is due. Based on the documents EPA's CMOM guide asks reviewers to examine, a wastewater utility should be able to produce these records quickly:

  • Discharge results. Lab results by outfall and parameter, checked against permit limits before the DMR is signed.
  • Overflow and bypass records. Date, location, estimated volume, cause and response for every event.
  • Flow records. Plant influent and effluent flow, plus collection system flow where meters exist.
  • Maintenance history. Cleaning, inspection and repair records that show the CMOM program is working.
  • Customer complaints. Backup and odor calls, tied to the address and the asset involved.

Lab results usually live in a lab system, and plant data in SCADA. The work is getting overflow records, maintenance history and complaints into the same place, so a reviewer can trace an overflow to the asset, the last cleaning and the customer calls. The guide to wastewater data management software covers the features to look for.

5. Accurate Sewer Billing That Funds the System

The first four solutions cost money every year. Sewer rates pay for them, so billing errors become maintenance that does not get done. According to an MRSC analysis of sewer rate structures (2017), most sewer rates include a base charge that applies regardless of water use. Where utilities assign equivalent residential units (ERUs) to commercial accounts, they most commonly base them on meter size and fixture counts. MRSC also describes setting residential charges from winter water use, so summer irrigation does not count as sewer flow.

Billing also produces data the rest of the wastewater program uses:

  • Revenue by fund. Sewer revenue posted to its own accounts shows whether rates cover operations and planned capital.
  • Water use by premise. Planners compare billed water use with metered sewer flow to estimate how much extra flow comes from inflow and infiltration.
  • Customer counts by area. Connection counts by sewer basin feed capacity planning for new development.
  • Service requests by address. Backup calls tied to a premise point crews to the right pipe segment.
  • Rate plans that can change. When a rate study sets new sewer charges, the billing system should apply them without a custom software change.

Winter averaging, volume caps and ERU assignments each need their own setup and checks. The guide to wastewater billing explains how utilities calculate sewer charges and the errors to catch.

How to Pick Where to Start

Before you buy any wastewater management software, which gap is largest in your system?

  1. List your permit obligations and recent violations. Write down DMR deadlines, overflow reporting rules and any consent order or compliance schedule.
  2. Map the last three years of overflows, backups and emergency work orders. Clusters in one area usually point to a capacity problem or an asset near failure.
  3. Check how complete your asset inventory is. Note what share of pipes, manholes and lift stations have a known size, material, install year and condition score.
  4. Compare wet-weather and dry-weather flow at the plant. A large difference shows inflow and infiltration is worth measuring by basin.
  5. Check whether sewer revenue covers operations and planned capital. Review billing exceptions, unbilled sewered premises and the last rate study.
  6. Pick the solution that addresses the largest gap and set a 12-month measure. For example, the share of emergency work orders, the number of overflows, or the number of unbilled premises.

Several of the five depend on the same records, so work on the asset inventory and the work order process tends to help the others.

How SMART360 Supports Wastewater Utilities

SMART360 is a cloud-native platform for US water, electric and gas utilities with 3,000 to 100,000 accounts. It keeps assets, work orders, meter reads, billing and reports in one database:

  • Asset records and work orders sit in the same database as accounts and billing
  • Field technicians close work orders on mobile devices, including offline
  • Admins configure rate plans, which apply on every billing cycle
  • Meter reads are validated before they reach a bill
  • Water, sewer and stormwater are billed on one account
  • Reports and an audit trail record every transaction

SMART360 is not a SCADA system and does not supply sensors. It takes data from other systems through APIs, so readings and lab results can sit next to the asset, work order and account records. Island Water Authority reached 99% billing accuracy, 38% faster meter-to-bill and $3.2M in recovered revenue on SMART360. The platform has 50,000+ accounts live, 95% customer retention, a 99.9% uptime SLA and a typical go-live of 20 to 24 weeks. Utilities that bill stormwater on a different cycle can see how in the guide to billing stormwater quarterly.

Conclusion

The five wastewater management solutions work best as one program. Asset risk scores decide where crews go, work orders record what they did, monitoring shows where flow and overflows come from, data management turns all of it into permit reports, and billing funds the next year of work. Start with the gap that costs your utility the most, measure it for a year, and add the next solution on the same records.

See SMART360 in Action

SMART360 keeps assets, work orders, meter reads and water, sewer and stormwater billing in one database. See SMART360 for water and wastewater utilities and how it fits your operation.

Frequently Asked Questions

What are wastewater management solutions?

Wastewater management solutions are the programs and software a sewer utility uses to run its collection system, meet its permit and fund the work. Common examples are asset management, preventive maintenance and work orders, smart sewer monitoring, wastewater data management and sewer billing.

What is wastewater management software?

Wastewater management software holds the records a sewer utility runs on: asset inventory, work orders, inspection results, overflow records and customer accounts. Some products also handle billing and reporting. It usually takes sensor and plant data from SCADA and lab systems rather than replacing them.

What is CMOM in sewer system management?

CMOM stands for capacity, management, operation and maintenance. EPA's 2005 guide describes it as a set of practices for managing a sewer collection system over its life, including inventory, condition assessment, scheduled maintenance and overflow response.

What is smart wastewater monitoring?

Smart wastewater monitoring uses flow, level and rainfall sensors in the collection system to show how flow changes in real time. Utilities use the data to find inflow and infiltration, warn of overflows and target repairs. EPA groups it with asset management tools and condition assessment tools as smart sewer technologies.

How do wastewater utilities submit DMRs?

Under EPA's NPDES Electronic Reporting Rule, permittees have submitted discharge monitoring reports electronically since December 21, 2016, unless their permitting authority directs otherwise or has granted a waiver. Each report lists results by outfall and parameter against the permit limits.

About Two Cta Image

Ready to see how SMART360 fits your utility?

Book a personalized demo with the SMART360 team and see how SMART360 fits your utility?

Related Post From This Category